ThermocousTex Plasterboard - Youngman roofing and sheet metal works

By: Youngman Roofing And Sheet Metal Works  11-11-2011
Keywords: Thermal Insulation, Corrugated Cardboard, Acoustic And Thermal Insulation

ThermocousTex Plasterboard:

Thicknesses R Value Weight Density
25mm 0, 74m².K/W 2 kg/m² 87.5 kg/m³
35mm 1, 03m².K/W 2, 80 kg/m² 87.5 kg/m³

Kenaf Butt Edged panels in varying sizes.


Suitable for domestic, commercial and industrial ceilings where acoustic and thermal insulation is required.


- Plain
- Vinyl
- Foil Faced (butted with flap joint)
- MetroBoard Facing in black or grey
- Can be skimmed or plastered


Does not contribute to flame spread. Complies with SANS 428 Fire Standards;

  • Test reports;
    • FTC 08/081-A B2,B3 – 25mm Plaster Board;

Corrugated cardboard corners, and wrapped in plastic.


Butt joint

Width: 600mm
Length: 1200mm, 1500m, 1800mm, 2100mm, 2400mm, 2700mm, 3000mm, 3300mm, 3600mm.
Thermal Conductivity:

0,034 W/m.K

NRC Value:

0, 5 to 0, 9


- Nail up Ceiling
- Retro Fit Ceiling
- Suspended Ceiling
- Over Purlin Insulation
- Top Hat Section

Keywords: Acoustic And Thermal Insulation, Corrugated Cardboard, Edged Panels, Thermal Insulation,

Contact Youngman Roofing And Sheet Metal Works


Print this page


Other products and services from Youngman Roofing And Sheet Metal Works


Clean COLORBOND, Colorbond Ultra and Zincalume

Its coating consists of 55% aluminium, 43.5% Zinc and 1.5% silicone and comes with a AZ200 coating which means that for every square meter of steel that there is a minimum of 200 grams of zinc/aluminium coating. If you want long lasting attractive roof material that offers you excellent protection against severe environments, Clean COLORBOND™ Ultra steel is the only choice.


Youngman roofing and sheet metal works

Youngman Roofing representatives, with the support of Datlink, offer on-site inspections, and installation training and guidelines to clients and contractors when necessary. The rationale for the acquisition is to enable Youngman Roofing to provide a complete solution as well as specialist advice for our clients. A polyester fiber, which is used as a lay on insulation for ceilings and is available in thicknesses of 55mm, 75mm and 100mm.


Why Insulate - Youngman roofing and sheet metal works

Roofs equate to 50 – 60% of heat load, and will need R-values of between 2.70m²K/W to 3.70m²K/W, which equates to insulation of between 80 – 150mm thick depending on the roof type. Well designed buildings, with good quality insulation, improve health, productivity, reduce electricity costs and reduce the effects on the environment namely green house gases.


What is ThermocousTex - Youngman roofing and sheet metal works

The product is manufactured from a polyester fiber in an air laying machine that enables the produce to have varying densities and higher weight per square meter than other similar product. Green Certification:ThermocousTex is the only insulation product that has been certified GREEN by EcoSpecifier.What are the properties of ThermocousTex.


ThermocousTex Board - Youngman roofing and sheet metal works

ThermocousTex Composite Board, a composition of board and fiber, with varied vanishes, which is designed and manufactured in order to meet a specific acoustic and/or thermal requirement. PlainVinylFoil Faced (butted with flap joint) MetroBoard. Polyester Butt Edged panels in varying sizes. FTC 08/033-B B1,B2 – 35mm Vinyl Faced Board. FTC 08/049 B1,B2,H – 120mm Plain Board.


Thermocoustex Fibre- Youngman roofing and sheet metal works

Domestic and commercial roofing, on top of ceilings, cavity walls for wooden houses, dry wall cavity, where acoustic and thermal insulation is required. Saves on energy bill by reducing heat losses and air-conditioning energy. Improves acoustics for a better working environment.


ThermocousTex Silent Floor - Youngman roofing and sheet metal works

Application: Over Purlin for products such as IsoBoard to reduce noise, or for Engineered or laminate flooring: By using a 5mm ThermocousTex Silent Floor under the flooring, you will reduce the ‘knocking’ sound associated with wooden floors by more than 50%, it can also be used on top of screeds for double story dwellings. Used Under Laminated and Wooden Flooring Specifications.