Thermocoustex Fibre- Youngman roofing and sheet metal works

By: Youngman Roofing And Sheet Metal Works  11-11-2011
Keywords: Thermal Insulation, Acoustics, Thermal Conductivity

ThermocousTex Fibre:

Thicknesses R Value Weight Density
25mm 0, 74m².K/W 0, 70 to 2, 00 kg/m² 50 kg/m³
40mm 0, 74m².K/W 0, 70 to 2, 00 kg/m² 50 kg/m³
50mm 1, 31m².K/W 1, 20 to 4, 00 kg/m² 50 kg/m³
50mm 1, 31m².K/W 1, 20 to 4, 00 kg/m² 24 kg/m³
Description:

Acoustic and thermal insulation blanket, can be foil faced.

Application:

Domestic and commercial roofing, on top of ceilings, cavity walls for wooden houses, dry wall cavity, where acoustic and thermal insulation is required.

Properties:

Does not contribute to flame spread and is SANS428 approved.

  • Test reports;
    • FTC08-033a, B1,B2, Non-corrosive
    • Improves acoustics for a better working environment.
    • Saves on energy bill by reducing heat losses and air-conditioning energy.
Packing:

Polythene tube

Rolls:

- 1200mm Wide
- 10m Long

Thermal Conductivity:

0,038 W/m²ºC

NRC Value:

0, 52 to 0, 75

Keywords: Acoustic And Thermal Insulation, Acoustics, Thermal Conductivity, Thermal Insulation

Contact Youngman Roofing And Sheet Metal Works

Email

Print this page

Share

Other products and services from Youngman Roofing And Sheet Metal Works

11-11-2011

Clean COLORBOND, Colorbond Ultra and Zincalume

Its coating consists of 55% aluminium, 43.5% Zinc and 1.5% silicone and comes with a AZ200 coating which means that for every square meter of steel that there is a minimum of 200 grams of zinc/aluminium coating. If you want long lasting attractive roof material that offers you excellent protection against severe environments, Clean COLORBOND™ Ultra steel is the only choice.


11-11-2011

Youngman roofing and sheet metal works

Youngman Roofing representatives, with the support of Datlink, offer on-site inspections, and installation training and guidelines to clients and contractors when necessary. The rationale for the acquisition is to enable Youngman Roofing to provide a complete solution as well as specialist advice for our clients. A polyester fiber, which is used as a lay on insulation for ceilings and is available in thicknesses of 55mm, 75mm and 100mm.


11-11-2011

Why Insulate - Youngman roofing and sheet metal works

Roofs equate to 50 – 60% of heat load, and will need R-values of between 2.70m²K/W to 3.70m²K/W, which equates to insulation of between 80 – 150mm thick depending on the roof type. Well designed buildings, with good quality insulation, improve health, productivity, reduce electricity costs and reduce the effects on the environment namely green house gases.


11-11-2011

What is ThermocousTex - Youngman roofing and sheet metal works

The product is manufactured from a polyester fiber in an air laying machine that enables the produce to have varying densities and higher weight per square meter than other similar product. Green Certification:ThermocousTex is the only insulation product that has been certified GREEN by EcoSpecifier.What are the properties of ThermocousTex.


11-11-2011

ThermocousTex Board - Youngman roofing and sheet metal works

ThermocousTex Composite Board, a composition of board and fiber, with varied vanishes, which is designed and manufactured in order to meet a specific acoustic and/or thermal requirement. PlainVinylFoil Faced (butted with flap joint) MetroBoard. Polyester Butt Edged panels in varying sizes. FTC 08/033-B B1,B2 – 35mm Vinyl Faced Board. FTC 08/049 B1,B2,H – 120mm Plain Board.


11-11-2011

ThermocousTex Plasterboard - Youngman roofing and sheet metal works

Commercial and industrial ceilings where acoustic and thermal insulation is required. Kenaf Butt Edged panels in varying sizes.


11-11-2011

ThermocousTex Silent Floor - Youngman roofing and sheet metal works

Application: Over Purlin for products such as IsoBoard to reduce noise, or for Engineered or laminate flooring: By using a 5mm ThermocousTex Silent Floor under the flooring, you will reduce the ‘knocking’ sound associated with wooden floors by more than 50%, it can also be used on top of screeds for double story dwellings. Used Under Laminated and Wooden Flooring Specifications.