Weatherprufe | WeatherBond Enhance | Products

By: Weatherprufe  11-11-2011
Keywords: environmentally friendly, Abrasion Resistance

An acrylic dispersion designed for use in cementitious coatings. It increases the water-repellency of the coating as well as improving adhesion, abrasion resistance and flexibility.


To a standard 3:1 plaster mixture use WeatherBond Enhance at a rate of 5 litres per bag of cement when wetting the mix. The plaster is then applied in the conventional manner. Care should be taken to clean application implements immediately after use with clean water. In severe cases eg. Balconies or underground structures, the mixing rate can be increased to 10 litres per bag of cement. Can be used with cement powder to seal ponds, dams and reservoirs. Can be spray applied onto suitable prepared metal surfaces as a primer top coat (Interior of potable metal water tanks).  For this type of application the ratio of WeatherBond Enhance to cement should be 1:3. Add the cement powder to the WeatherBond Enhance with stirring and mix till a smooth paste is produced.


Obviates the need for 28 day curing time of cement & may be over coated as soon as dry
Easily incorporated into plaster mixes
Dramatically improves water-proofing, abrasion resistance and flexibility of plasters
Adheres to many substrates
Water-based for user and environmentally friendly use

Keywords: Abrasion Resistance, environmentally friendly

Contact Weatherprufe

Email - none provided

Print this page


Other products and services from Weatherprufe


Weatherprufe | Products

WeatherPrufe ACRYLIC ROOF PAINT: Pure Acrylic adhesion promoted iron oxide shade roof paints designed for maximum durability in harsh climatic conditions. Available in Red Oxide, Black, Terra Cotta, Tan, Charcoal, and Permanent Green. Available in 20 and 5 Litre plastic industrial-grade buckets.


Weatherprufe | Tornado Water Based Degreaser

For oily floors and galvanized roofs it is recommend that the product be used undiluted. An aqueous blend of surfactants formulated to remove oil and dirt from soiled surfaces. On galvanized roof sheets scrub the surface with stiff bristle or nylon brushes. Wash with clean water and allow to dry before painting.


Weatherprufe | Solvent Based Degreaser

An emulsified blend of solvents, detergents and scouring agents designed to remove oil and grease from soiled substrates. On galvanized roof sheets scrub the surface with stiff bristle or nylon brushes. Scrub off the substrate using a bristle brush and clean water. Allow the surface to dry before coating.


Weatherprufe | Masonry Primer | Products

A spreading rate of 6 - 10 square metres per litre is obtained on unpainted masonry substrates, and 8 - 10 square meters per litre on previously painted surfaces. Solvent based alkali-resistant primer for dry unpainted masonry substrates or on previously painted chalking surfaces.