Geyserwise

By: Geyser Wise  11-11-2011
Keywords: Earth Leakage, Geyser Timer

Only the GeyserWise MAX model has the anode indicator light.

GeyserWise MAX functionality

Use as a geyser timer

  • Clear display of water temperature, time, day, heating mode and malfunction conditions.
  • Auto or manual heating.
  • Easy temperature setting to your requirements (30 - 65°C) factory default is 55°C.
  • Four different temperature settings.
  • Daily programmable timer with four time settings.
  • Error conditions alert by warning code E1 to E7.
  • Electronic thermostat with mechanical thermal cut-out at 90°C.

Use as timer on a thermosyphon solar system

  • Clear display of water temperature, time, day, heating mode and malfunction conditions on solar system and geyser.
  • Auto or manual heating.
  • Easy temperature setting to your requirements (30 - 65°C) factory default is 55°C.
  • Four different temperature settings.
  • Daily programmable timer with four time settings.
  • Error conditions alert by warning code E1 to E7.
  • Electronic thermostat with mechanical thermal cut-out at 90°C. Please note the cut-out temperature for solar systems expected to reach temperatures above this temperature.

Use as timer and differential control on pumped solar system

  • Clear display of water temperature, time, day, heating mode and malfunction conditions on solar system and geyser.
  • Auto or manual heating.
  • Easy temperature setting to your requirements (30 - 65°C) factory default is 55°C.
  • Four different temperature settings.
  • Daily programmable timer with four time settings.
  • Error conditions alert by warning code E1 to E9.
  • Electronic thermostat with mechanical thermal cut-out at 90°C. Please note the cut-out temperature for systems expected to reach temperatures above this temperature.
  • Differential controller 12V and 220V systems.

Technical Parameters

  • Operating voltage 230VAC / 50HZ.
  • Main Relay contact rating 30AMP (Max 4KW).
  • Secondary relays pump and solenoid 5Amp.
  • Operating voltage range 160V – 250V AC.
  • Earth leakage protection at 25MA action time = 0,1 second.
  • Temperature display range 0 - 99°C (“-5” when below -5°C “EA” when above 99°C).
  • High temperature warning above 84°C.
  • Temperature setting ranges 30 - 65°C (heating water electrically).
  • Heat failure – when increase at a rate of less than 4°C per hour.
  • Electronic thermostat with mechanical thermal cut-out at 90°C.
  • Dry heat detection – empty cylinder.
  • Temperature tolerance ± 2%.
  • Temperature differential setting 1°C.
  • Switching differential 6°C.
  • 2nd temperature probe for solar.
  • Solar differential 7°C.
  • Temperature probe failure detection for both collector and tank.
  • Temperature probe range for geyser is -30 to + 130°C.
  • Temperature probe range for collector is -30 to + 260°C.
  • Isolate both L + N when in off state.
  • Collector antifreeze protection at 5°C

Geyserwise TS functionality

Use as a geyser timer

  • Clear display of water temperature, time, day, heating mode and malfunction conditions.
  • Auto or manual heating.
  • Easy temperature setting to your requirements (30 - 65°C) factory default is 55°C.
  • Four different temperature settings.
  • Daily programmable timer with four time settings.
  • Error conditions alert by warning code E1 to E5.
  • Mechanical thermal cut-out at 90°C. Please note the cut-out temperature for systems expected to reach temperatures above this temperature.

Use as timer on a thermosyphon solar system

  • Clear display of water temperature, time, day, heating mode and malfunction conditions on solar system and geyser.
  • Auto or manual heating.
  • Easy temperature setting to your requirements (30 - 65°C) factory default is 55°C.
  • Four different temperature settings.
  • Daily programmable timer with four time settings.
  • Error conditions alert by warning code E1 to E5.
  • Mechanical thermal cut-out at 90°C. Please note the cut-out temperature for systems expected to reach temperatures above this temperature.

Technical parameters

  • Operating voltage 230VAC / 50HZ.
  • Main Relay contact rating 30AMP (Max 4KW).
  • Operating voltage range 160V – 250V AC.
  • Earth leakage protection at 25MA action time = 0,1 second.
  • Temperature display range 0 - 99°C ("-5" when below -5°C "EA" when above 99°C).
  • High temperature warning above 84°C.
  • Temperature setting ranges 30 - 65°C (Heating water electrically).
  • Heat failure – when increase at a rate of less than 4°C per hour.
  • Mechanical thermal cut-out at 90°C. Please note the cut-out temperature for systems expected to reach temperatures above this temperature.
  • Dry heat detection – empty cylinder.
  • Temperature tolerance ± 2%.
  • Temperature differential setting 1°C.
  • Switching differential 6°C.
  • Temperature probe failure detection for tank.
  • Temperature probe range for geyser is -30 to + 130°C.
  • Isolate both L + N when in off state.

Technical parameters

  • Operating voltage 230VAC / 50HZ.
  • Main relay contact rating 30AMP (Max 4KW).
  • Operating voltage range 160V – 250V AC.
  • Earth leakage protection at 25MA action time = 0,1 second.
  • Temperature display range 0 - 99°C ("-5" when below -5°C "EA" when above 99°C).
  • High temperature warning above 84°C.
  • Temperature setting ranges 30 - 65°C (heating water electrically).
  • Heat failure – when increase at a rate of less than 4°C per hour.
  • Electronic open circuit at 120°C (cut-out).
  • Dry heat detection – empty cylinder.
  • Temperature tolerance ± 2%.
  • Temperature differential setting 1°C.
  • Switching differential 6°C.
  • Temperature probe failure detection tank.
  • Temperature probe range for geyser is -30 to + 130°C.
  • Isolate both L + N when in off state.

Geyserwise Satchwell TS functionality

Use as a geyser timer

  • Clear display of water temperature, time, day, heating mode and malfunction conditions.
  • Auto or manual heating.
  • Easy temperature setting to your requirements (30 - 65°C) factory default is 55°C.
  • Four different temperature settings.
  • Daily programmable timer with four time settings.
  • Error conditions alert by warning code E1 to E5.
  • Soft Probe open circuit at 120°C.

Use as timer on a thermosyphon solar system

  • Clear display of water temperature, time, day, heating mode and malfunction conditions on solar system and geyser.
  • Auto or manual heating.
  • Easy temperature setting to your requirements (30 - 65°C) factory default is 55°C.
  • Four different temperature settings.
  • Daily programmable timer with four time settings.
  • Error conditions alert by warning code E1 to E5.
  • Soft Probe open circuit at 120°C.

Technical parameters

  • Operating voltage 230VAC / 50HZ.
  • Main relay contact rating 30AMP (Max 4KW).
  • Operating voltage range 160V – 250V AC.
  • Earth leakage protection at 25MA action time = 0,1 second.
  • Temperature display range 0 - 99°C ("-5" when below -5°C "EA" when above 99°C).
  • High temperature warning above 84°C.
  • Temperature setting ranges 30 - 65°C (heating water electrically).
  • Heat failure – when increase at a rate of less than 4°C per hour.
  • Electronic open circuit at 120°C (cut-out).
  • Dry heat detection – empty cylinder.
  • Temperature tolerance ± 2%.
  • Temperature differential setting 1°C.
  • Switching differential 6°C.
  • Temperature probe failure detection tank.
  • Temperature probe range for geyser is -30 to + 130°C.
  • Isolate both L + N when in off state.

Geyserwise Satchwell TS functionality

Use as a geyser timer

  • Clear display of water temperature, time, day, heating mode and malfunction conditions.
  • Auto or manual heating.
  • Easy temperature setting to your requirements (30 - 65°C) factory default is 55°C.
  • Four different temperature settings.
  • Daily programmable timer with four time settings.
  • Error conditions alert by warning code E1 to E5.
  • Soft Probe open circuit at 120°C.

Keywords: Earth Leakage, Geyser Timer