Ultraspin Equipment (Systems) Page

By: Procon Environmental Technologies  11-11-2011
Keywords: Water Treatment, Tertiary Treatment

The Ultraspin Separator consists of the following components:
Ultraspin separator, skimmer, debris strainer, oil collection or waste oil tank,  pressure switch, helical rotor pump, back flushing feature, recycle feature, aeration tank, electrical control box.


•    High separation efficiency

•    Low maintenance and Cost Effective

•    Operational Flexibility

•    Quality construction

•    Ultimate solution in oily water treatment

Ultraspin Engineered Systems:

•    No chemicals or cleaning required

•    Can be used for oil and fat product recovery

Ultraspin OS Range

- (Oscillating System)

Standard pneumatic models are available from 3,5 – 7m


/h (3,500 – 7000 litres).  The systems include tertiary treatment with an aeration system to strip volatiles.

OS35 (3,5 m3/h)

– 3 500l/hr Secondary Treatment Auto Recycle Unit treating 3,5m


Of Water

Typical Discharge 10 - 20mg/l  - Tertiary Treatment - Typical Discharge 2.5 – 20mg/l

OS 70 (7m3/h)

– 7 000l/hr Secondary Treatment Auto Recycle Unit treating 7m


Of Water

Typical Discharge 10 - 20mg/l  and Tertiary Treatment

Ultraspin ES Range

- (Electrical or Engineered Range)

The Electrical range consists of ES 7, ES 10, ES15, ES 25, ES 35, and ES50.

The Ultraspin engineered systems has in the past designed systems of 1000m


/h and above.

All systems can include separator skid, skimmer, pump set (with helical roto pump), electrical control panel, back-up strainer, automated back flush, level control and auto recycle function

ES 7

- Nominal 7 000l/hr (7m


/hr) oily water treatment system.

(Clients generally prefer OS70 or go for ES 15)


- Nominal 15 000l /h (15m


/hr) oily water treatment system.

Separators mounted in stainless steel vessel.  

ES25 - Nominal 25000l/hr (25m3/hr) oily water treatment separator.
Separators mounted in stainless steel vessel.


Nominal 50 000l/hr (50m


/hr) oily water treatment separator.

Separators mounted in stainless steel vessel. Included inlet, outlet and oily reject pressure gauges; inlet outlet and reject sample points; back flush line; with drain, manual back flush and reject isolation valves.


Nominal 110 000l/hr (110m


/hr) oily water treatment separator.

Keywords: Tertiary Treatment, Water Treatment

Contact Procon Environmental Technologies


Print this page


Other products and services from Procon Environmental Technologies


Oil skimmers | oil water separators

The separated oil is removed via a hole in the separator end face, and the treated water is discharged out the other end of the tube.WHY IS IT SUCH A POWERFUL SEPARATOR?Unlike plate-pack-style separators the Ultraspin™ Separator does not rely on weak gravity forces for separation.


Vehicle Wash Water Reclaim Systems

The Vehicle Wash Water Reclaim System can save you up to 80% of water consumption while ensuring you reduce your environmental liabilities and ensure that the current and future discharge standards are met and complied with. The Ultraspin VR range vehicle wash system is a 4-stage water treatment system designed to remove contaminants and condition the water.


Ultraspin Oil Skimmer | South Africa

The Ultraspin surface skimmer is designed to remove oil, fats and floating material from tanks, sumps, interceptors and other effluent pits. The central ring sits in the centre of the skimmer and the diaphragm/bellows allows it to float independently of the skimmer body. Oil skimmers remove oil, fat and other floating materials from tanks, sumps, pits, and other industrial situations.



Spent cartridge rejects water- will not hold water – Spent MyCelx cartridges can be incinerated with very high BTU value – 150,000 Btu/ spent oil cartridge with ash value equivalent to that of oil removed. Fifteen patents, Fortune 100 clients, and hundreds of installations worldwide attest to the fact that MyCelx is the undisputed, best solution for reliable oil and hydrocarbon removal from water and air.