Sound Equipment

By: Mproductions  11-11-2011
Keywords: Rigging

M PRODUCTIONS have a huge variety of sound equipment, processors, sound desks, microphones and cables to handle all shows from small conferences to large outdoor events. We now own a 25kW (10-A-Side) AD Systems Line Array which could handle outdoor events up to 8000 pax.  We also own a smaller Yorkville Elite PA System as well as various smaller systems including JBL Eon G2's, Work WPL5A's, ECLER, and EV to name a few.

The CLA Series line array system meets the prerequisites of touring and installation companies in many respects. Up to now rental companies had to make use of a multitude of different PA systems – the CLA Series radically changes this situation.

The principle component of each CLA system is the CLA-2 mid/high module. An extremely compact, lightweight and highcapacity line array element, CLA-2 is equipped with a specially designed 10” low/mid Neodym loudspeaker and 2x1” Neodym H.F. compression drivers mounted on AD Systems unique VLAT waveguide to generate a coherent wavefront.

The CLA-2 has a horizontal dispersion of 90º and is a degree precise curvable unit allowing the creation of a controlled vertical dispersion angle.

The CLA-2 benefits from integral flying hardware and quick release pins approved to BGV-C1 . Vertical adjustment is made at the rear of each cabinet. The front of the cabinets are fixed together to ensure effective line curvature. The CLA-2 can be used without flown bass. The units are exceedingly effective in full range array applications by virtue of the vented cabinet design and low tuning frequency.

The CLA-D downfill is equipped with the same 10” low/mid Neodym loudspeaker as CLA-2 but with a single 1” Neodym HF compression driver mounted on a specially developed horn. The horn provides a horizontal dispersion angle of 100º a vertical dispersion of 5º up maintaining an effective waveform and 30º down to provide near field coverage. The advantage of this configuration is the CLA-D can be used at the bottom of each line without creating high levels of reflective sound whilst providing maximum near field coverage.

System Philosophy

The Compact Line Array, CLA loudspeaker system builds on an emaculate reputation for delivering innovative systems with outstanding performance & reliability whilst maintaining ease of use.

Technical Data:

Frequency range:

60 Hz – 20 kHz with DSC-24 controller

Sensitivity (1W/1m):

103db

Power handling:

350w (R.M.S.) 700w peak

Impedance:

16 ohm

SPL max:

129 db

Coverage:

90º horizontal dispersion. Vertical dispersion depends on line configuration, not usable as single cabinet.

Loudspeakers:

Low:

10” Neodym loudspeaker - 3" Voice Coil.

High:

2 x 1” Neodym compression drivers mounted on AD VLAT coupler.

1100 Hz

Connectors:

2 x Speakon NL4MP (+1/-1)

Dimensions:

W 500mm x H 275mm x D 350mm

Weight:

20 kg

Finish: 15mm Birch Plywood, All-weather-paint, Recessed handles on both sides, 77% Transparent steel grille, Acoustic foam.

Rigging: Integrated flying hardware for vertical array applications. BGV-C1 approval to fly up to 24 CLA-2/D units.

CLA-D

The CLA-D can be used as a downfill and has a horizontal dispersion of 100º and a vertical dispersion of 5º up and 30º down.

Technical Data:

Frequency range:

60 Hz – 20 kHz with DSC-24 controller

Sensitivity (1W/1m):

103db

Power handling:

350w (R.M.S.) 700w peak

Impedance:

16 ohm

SPL max:

129 db

Coverage:

100º horizontal dispersion. Vertical dispersion 5º up - 30º down.

Loudspeakers:

Low:

10” Neodym loudspeaker - 3" Voice Coil.

High:

1” Neodym compression drivers mounted on AD VLAT coupler.

1100 Hz

Connectors:

2 x Speakon NL4MP (+1/-1)

Dimensions:

W 500mm x H 275mm x D 350mm

Weight:

20 kg

Finish: 15mm Birch Plywood, All-weather-paint, Recessed handles on both sides, 77% Transparent steel grille, Acoustic foam. 

Rigging: Integrated flying hardware for vertical array applications. BGV-C1 approval to fly up to 24 CLA-2/D units.


CLA-B

The CLA-B is a flown or ground stacked bass for the CLA-Series.

Technical Data:

 
Design: Triple chamber vented bass system
Frequency range: 40Hz-350Hz
Power handling: 1600w (R.M.S.) 3200w Peak
Impedance:
SPL max: 136 dB

Loudspeakers:

 
Low: 2x15 Neodym Long Excursion.
40Hz - 350Hz
Connectors: 2 x Speakon NL4MP (+1/-1)
Dimensions: W 500mm x H 550mm x D 700mm
Weight: 42 kg
Finish: 15mm Birch plywood, All-weather-paint, 77% Transparent steel grille, Recessed handles, Acoustic Foam Rigging: Integrated flying hardware for flown & ground stacked vertical array applications with CLA2/D. Satellite pole adaptor.
 

High-performance bass/sub-bass system in an optimally designed dual 18" rectangular bass-reflex cabinet.
Suitable for applications that require very high bass & sub-bass output, the unit can be combined with any full range or mid-high system manufactured by AD Systems including NEOCraft.

Technical Data:

 
Frequency response: 30Hz - 300Hz
Sensitivity (1W/1m): 102dB
Power handling: 2000 W (RMS)
Impedance: 4 ohms
SPL max: 138dB

Loudspeakers:

 
Low: 2 x 18” Long Excursion
X-over Freq Hz 80 - 200Hz
Rigging: Tripod Base, Countersinks for Nylon Feet
Connectors: 2 x Speakon NL4 (+2/-2)
Weight: 88kgs - 194lbs
Finish: 18mm Birch plywood, all-weather-paint, recessed handles, extractable steel grille, acoustic foam, Nylon standing feet.

Keywords: Rigging

Other products and services from Mproductions

11-11-2011

Lighting Equipment

Use only professional DMX intelligent- and generic lighting for all our productions including moving head fixtures, scanners, follow spots, LED parcans, DMX floodlights and industrial sized smoke and haze machines. However, it soon became the primary method for linking not only controllers and dimmers, but also more advanced fixtures and special effects devices such as fog machines and moving lights.