DT80 General Purpose Data Logger

By: Measurement & Control Solutions  11-11-2011
Keywords: Data Storage, Memory Stick, Data Logger

Features
  • • USB memory for easy data & program transfer

  • • Dual Channel Isolation Technology

  • • 2 Serial ‘Smart Sensor’ ports

  • • User Definable allocation of memory size & mode

  • • Web Interface

  • • FTP for automatic data transfer

  • • Modbus for SCADA connection

  • • SDI-12 (multiple networks)

  • • Up to 15 Analog (± 30V) sensor inputs

  • • Expandable to 300 analog inputs

  • • 12 Flexible Digital channels

The dataTaker DT80 is a smart data logger that provides an extensive array of features that allow it to be used across a wide variety of applications.

The Smarter Solution

The DT80 is a robust, stand alone, low power data logger featuring USB memory stick support, 18 bit resolution, extensive communications capabilities and built-in display. The dataTaker DT80’s Dual Channel concept allows up to 10 isolated or 15 common referenced analog inputs to be used in many combinations.

With support for multiple SDI-12 sensor networks, Modbus for SCADA systems, FTP and Web interface, 12V regulated output to power sensors, the DT80 is ready to be rolled out into environmental, industrial and many other types of monitoring projects.

Versatile Measurement

Analog and digital channels, high-speed counter inputs, phase encoder inputs and programmable serial sensor channels allow the DT80 to easily connect to most sensors and data measurement sources. Temperature, voltage, current, 4-20mA loops, resistance, bridges, strain gauges, frequency, digital, serial and calculated measurements can all be scaled, logged and returned in engineering units or within statistical reporting. Group sampling, logging, alarm and control tasks within schedules to suit your requirements. Smart sensors, GPS, PLCs and other intelligent devices are supported via 2 serial sensor ports (RS232 or RS422/485), with our optional CANgate interface available for CAN bus applications.

Manage a variety of sensors or devices using the Sensor Power options via dedicated power output, digital outputs or the latching relay configurations.

Superior Data Storage and Communications

Store up to 5 million data points in user defined memory, log as much or as little as you need with independent control of schedule size and mode. Overwrite or stop logging once allocated memory is full. Archive data on alarm event, copy to USB memory or transfer via FTP, the choice is yours.

Communications features include RS232 with modem support, USB, Ethernet and USB memory stick ports. Connect to the DT80 locally, remotely or over the Internet. The web interface allows users to configure the DT80, access logged data and see current measurements as mimics or in a list using a web browser. FTP provides data to your office over the internet or mobile phone network, without the need for polling or specific host software.

Keywords: Analog Inputs, Channel Concept, Communications Store, Current Measurements, Data Logger, Data Measurement, Data Storage, Data Transfer, Intelligent Devices, Latching Relay, Memory Stick, Program Transfer, Serial Sensor, Usb Memory, Usb Memory Stick,

Contact Measurement & Control Solutions

Email

Print this page

Share

Other products and services from Measurement & Control Solutions

11-11-2011

dataTaker - CEM20 Channel Expansion Modules

Incorporating the same dual isolation technology as the DT80 range dataTaker data loggers each channel of the CEM20 can be used for two isolated inputs or three common reference inputs so the maximum inputs increases further. Increasing the channel capacity of the dataTaker DT80 range is made very easy by adding dataTaker Channel Expansion Modules. Analogue and control cables for connection to the dataTaker data logger are included as standard.


11-11-2011

DT800 High Speed Data Logger

An RS232 port, an Ethernet port and a Flash card port are provided as standard for dataTaker programming and data retrieval. These are isolated and over voltage protected, with measurement across 12 autoscaling ranges from 10mV to 13V full scale. The DT800 has 42 analogue inputs, giving 42 separate single ended channels or 24 differential channels. A Serial Sensor Port is also included for sensors with RS232/485 or SDI-12 capability.


11-11-2011

DT85 General Purpose Data Logger

With support for multiple SDI-12 sensor networks, Modbus for SCADA systems, FTP and Web interface, 12V regulated output to power sensors, the DT85 is ready to be rolled out into environmental, industrial and many other types of monitoring projects. Analog and digital channels, high-speed counter inputs, phase encoder inputs and programmable serial sensor channels allow the DT85 to easily connect to most sensors and data measurement sources.


11-11-2011

dataTaker - DT80G Geotechnical Data Logger

The dataTaker GeoLoggers can monitor a wide variety of geotechnical datalogging applications including slope stability, subsidence, dam wall monitoring, tunnel and mining excavation, ground water, tunnel wall monitoring and site assessment.