dataTaker - DT80G Geotechnical Data Logger

By: Measurement & Control Solutions  11-11-2011
Keywords: Sensors, Data Storage, Data Acquisition

 Features
  • • Supports vibrating wire sensors, including

  •     - Geokon

  •     - RST Instruments

  •     - Slope Indicator

  •     - Soil Instruments

  •     - and more..

  • • Web Interface

  • • Modbus for sensors and SCADA connection

  • • Up to 15 Analog (± 30V) sensor inputs

  • • Expandable to 300 analog inputs

Supporting vibrating wire sensors the dataTaker DT80G GeoLogger is ideal for all geotechnical data logging applications. The dataTaker GeoLoggers have built-in vibrating wire support providing ideal data acquisition and monitoring solution for the engineer working in the geotechnical environment.

The low cost, low power dataTaker DT80G is extremely versatile and easy to configure for communications, data capture and data analysis. View the data in real time or store up to 5 million data points. Data storage and retrieval can be achieved via USB memory stick, FTP, cell phone, Modbus for SCADA, Ethernet or Web.

For Geotechnical Applications

The dataTaker GeoLoggers can monitor a wide variety of geotechnical datalogging applications including slope stability, subsidence, dam wall monitoring, tunnel and mining excavation, ground water, tunnel wall monitoring and site assessment.

Versatile Measurement

The dataTaker DT80G has 5 analog channels capable of measuring up to 5 vibrating wire strain gauges with thermistors or 15 vibrating wire strain gauges without thermistors. If additional channels are required the dataTaker DT85G has 16/48 vibrating wire channels. The DT80G and DT85G can be expanded simply by connecting dataTaker Channel Expansion Modules (CEM20) to provide 100 to 300 vibrating wire channels with thermistors.

The advanced new dataTaker DT80G range Geologgers are compatible with all major brands of geotechnical instrumentation including Slope Indicator, RST Instruments, Geokon, Soil Instruments, Roctest, AGI - Applied Geomechanics Inc.

Manage a variety of sensors or devices using the Sensor Power options via dedicated power output, digital outputs or the latching relay configurations.

Superior Data Storage and Communications

Store up to 10 million data points in user defined memory, log as much or as little as you need with independent control of schedule size and mode. Overwrite or stop logging once allocated memory is full. Archive data on alarm event, copy to USB memory or transfer via FTP, the choice is yours.

Communications features include RS232 with modem support, USB, Ethernet and USB memory stick ports. Connect to the DT80 locally, remotely or over the Internet. The web interface allows users to configure the DT80G, access logged data and see current measurements as mimics or in a list using a web browser. FTP provides data to your office over the internet or mobile phone network, without the need for polling or specific host software.

Keywords: Analog Inputs, Channel Expansion, Communications Store, Current Measurements, Data Acquisition, Data Logging, Data Storage, Expansion Modules, Latching Relay, Memory Stick, Sensors, Usb Memory, Usb Memory Stick,

Contact Measurement & Control Solutions

Email

Print this page

Share

Other products and services from Measurement & Control Solutions

11-11-2011

dataTaker - CEM20 Channel Expansion Modules

Incorporating the same dual isolation technology as the DT80 range dataTaker data loggers each channel of the CEM20 can be used for two isolated inputs or three common reference inputs so the maximum inputs increases further. Increasing the channel capacity of the dataTaker DT80 range is made very easy by adding dataTaker Channel Expansion Modules. Analogue and control cables for connection to the dataTaker data logger are included as standard.


11-11-2011

DT80 General Purpose Data Logger

With support for multiple SDI-12 sensor networks, Modbus for SCADA systems, FTP and Web interface, 12V regulated output to power sensors, the DT80 is ready to be rolled out into environmental, industrial and many other types of monitoring projects. Analog and digital channels, high-speed counter inputs, phase encoder inputs and programmable serial sensor channels allow the DT80 to easily connect to most sensors and data measurement sources.


11-11-2011

DT800 High Speed Data Logger

An RS232 port, an Ethernet port and a Flash card port are provided as standard for dataTaker programming and data retrieval. These are isolated and over voltage protected, with measurement across 12 autoscaling ranges from 10mV to 13V full scale. The DT800 has 42 analogue inputs, giving 42 separate single ended channels or 24 differential channels. A Serial Sensor Port is also included for sensors with RS232/485 or SDI-12 capability.


11-11-2011

DT85 General Purpose Data Logger

With support for multiple SDI-12 sensor networks, Modbus for SCADA systems, FTP and Web interface, 12V regulated output to power sensors, the DT85 is ready to be rolled out into environmental, industrial and many other types of monitoring projects. Analog and digital channels, high-speed counter inputs, phase encoder inputs and programmable serial sensor channels allow the DT85 to easily connect to most sensors and data measurement sources.