Products - low pressure filters

By: Hy-pro Filtration  11-11-2011
Keywords: filter, Remove Water, Filter Assemblies

  • Remove water to extend fuel injector life & increase combustion engine fuel efficiency.

  • 500 psi / 35 bar max operating F8 housing features large element. Top loading housing is ideal for high viscosity lube oils, port to port match for 8300.

  • LF / LFM high flow filter assemblies feature Hy-Pro DFE rated elements in single or multi-round configurations. Available in coated steel or stainless with pressure options up to 1500 psi / 102 bar.

  • MF3 medium pressure in-line filter with operating pressure up to 1200 psi / 83 bar is ideal for hydrostatic charge circuits. A technology upgrde to spin-ons.

  • Hy-Pro DFE Rated HP409 series medium pressure spin-on element . Ideal for mobile equipment return-line and hydrostatic applications.

  • Low pressure spin-on assemblies with operating pressure to 200 psi / 14 bar feature DFE rated elements in a wide range of media options. Ideal for mobile equipment & low pressure return or off-line circuits.

  • TF4 in-tank return filters with operating pressures to 150 psi / 10 bar feature Hy-Pro coreless elements or optional HF4 auto spec element. Compact alternative to spin-ons for HPUs & mobile hydraulic systems.

  • TFR in-tank return filter operating pressures to 150 psi / 10 bar feature inside to out flow direction elements with integral bypass valve. Ideal for HPUs & mobile equipment hydraulic systems.

  • Keywords: filter, Filter Assemblies, Remove Water,

    Other products and services from Hy-pro Filtration

    11-11-2011

    Product Categories

    Maintain proper fluid condition with Hy-Pro filter carts, dedicated off-line filtration, vacuum dehydration, turbine oil & fuel coalesce, soluble varnish removal SVR and electrostatic contamination removal systems. Experience years of trouble free EHC operation, avoid servo valve failures, expensive flushes and premature fluid replacement with our total Phosphate Ester solution.


    11-11-2011

    Products - filter element upgrade

    Hy-Pro lube specific lube elements optimize bearing lube element life where the combination of high viscosity, high flow and low terminal ?P alarm settings require the lowest possible clean element pressure drop and high efficiency particulate removal.


    11-11-2011

    Products - varnish prevention and removal

    Filter element spark discharge is a recognized cause of fluid degradation in hydraulic and lube oil systems creating soluble by-products and sub-micron carbon particles that deplete additives, cause fluid darkening and lead to varnish deposits. Both VFTK & VLTK yield Membrane Patch Colorimetric for lube oil varnish potential per ASTM D02.C0.01 WK13070. Ideal for Maintenance of Small Turbine Lube Oil & Compressor Reservoirs.


    11-11-2011

    Products - phosphate ester fluid solutions

    TMRN2 is an active breather system that maintains the air in the headspace that continuously introduces clean dry Nitrogen.As the dry N2 transfers through the headspace at RH < 1% the oil gives up its water striving to achieve equilibrium with the dry Nitrogen in the headspace.


    11-11-2011

    Products - fluid conditioning equipment

    The configuration of two elements in series reduces fluid processing time and allows balanced use of high efficiency glass media that can be combined with water removal capabilities. COT turbine oil coalesce skids rapidly remove water from turbine oil with> 95% single pass efficiency, control particulate to 16/14/11 and lower.


    11-11-2011

    Products - duplex filter assemblies

    DLF / DLFM high flow low-medium pressure duplexes are ideal for critical high speed bearing lube pumping skids & other high flow or high viscosity applications. Ideal for continuous operation critical systems such as turbine seal oil, boiler feed pumps, FD-ID fan lube oil. Ideal for critical hydraulic systems such as HPU pump discharge, wind turbine and marine hydraulics. DFH high pressure duplex operating pressures up to 3000 psi / 210 bar.


    11-11-2011

    Products - high pressure filters

    PFH pressure filter max operating 8700 psi / 615 bar available in four sizes to handle applications from actuator valves to high flow pump discharge. PFHB bi-directional filter with 6200 psi / 450 bar operating pressure filter fluids in both flow directions. PF4 high flow high pressure filter max operating pressure 5000 psi / 350 bar. PFH features DFE rated filter elements for lower more stable ISO codes.