Products - filter element upgrade

By: Hy-pro Filtration  11-11-2011
Keywords: Steam turbine, Filter Element, Water Removal

  • Dynamic Filter Efficiency (DFE) is the evolution in hydraulic and lube filter element performance validation and development, and Hy-Pro's competitive advantage.

  • Dynafuzz stainless fiber media element upgrades are impervious to strong acids that can form in phosphate ester fluids and compromise glass media integrity.  Ideal for steam turbine EHC systems that have had problems with media migrations.

  • An increasing population of wind farms and turbines surpassing the warranty period = opportunity to help these users improve reliability.

  • HPQ290960S elements ares used on water misting / fogging systems on combustion turbine air intake for cooling and NOX emmission controls.  Contact Hy-Pro for more information these critical air intake spray system element upgrades. 

  • Hy-Pro lube specific lube elements optimize bearing lube element life where the combination of high viscosity, high flow and low terminal ΔP alarm settings (15 psi / 1 bar) require the lowest possible clean element pressure drop and high efficiency particulate removal.

  • Filter element spark discharge is a recognized cause of fluid degradation in hydraulic and lube oil systems creating soluble by-products and sub-micron carbon particles that deplete additives, cause fluid darkening and lead to varnish deposits.  Hy-Pro NSD (Non Spark Discharge) elements are the solution.

  • Didn't find the element you need in our interchange guide?  Please use this datasheet to provide the necessary information for us to quote it.  Please also include several digital photos and information on the application including fluid, operating temperature and application.

  • Hy-Pro manufatcures several transmission filter kits for Allison and ZF automatic transmissions in high efficiency high capacity glass and stainless mesh medias

  • Hy-Pro filter element upgrades are available for use in Turbo TOC oil conditioners.  High efficiency glass elements for pre-filter, coalesce & separator and post-filter stages achieve a higher efficiency particulate removal, ensure water separation through equipment plus lower overall turbine lube reservoir ISO codes.

  • Hy-Pro A media water removal can be combined with any DFE rated glass media to remove free water from hydraulic & lube oils and fuels down to fluid saturation point.  Water removal is available in any Hy-Pro element configuration including filter carts and dedicated off-line systems. 

  • Keywords: Filter Element, Lube Oil Systems, Steam turbine, Water Removal

    Other products and services from Hy-pro Filtration


    Product Categories

    Maintain proper fluid condition with Hy-Pro filter carts, dedicated off-line filtration, vacuum dehydration, turbine oil & fuel coalesce, soluble varnish removal SVR and electrostatic contamination removal systems. Experience years of trouble free EHC operation, avoid servo valve failures, expensive flushes and premature fluid replacement with our total Phosphate Ester solution.


    Products - varnish prevention and removal

    Filter element spark discharge is a recognized cause of fluid degradation in hydraulic and lube oil systems creating soluble by-products and sub-micron carbon particles that deplete additives, cause fluid darkening and lead to varnish deposits. Both VFTK & VLTK yield Membrane Patch Colorimetric for lube oil varnish potential per ASTM D02.C0.01 WK13070. Ideal for Maintenance of Small Turbine Lube Oil & Compressor Reservoirs.


    Products - phosphate ester fluid solutions

    TMRN2 is an active breather system that maintains the air in the headspace that continuously introduces clean dry Nitrogen.As the dry N2 transfers through the headspace at RH < 1% the oil gives up its water striving to achieve equilibrium with the dry Nitrogen in the headspace.


    Products - fluid conditioning equipment

    The configuration of two elements in series reduces fluid processing time and allows balanced use of high efficiency glass media that can be combined with water removal capabilities. COT turbine oil coalesce skids rapidly remove water from turbine oil with> 95% single pass efficiency, control particulate to 16/14/11 and lower.


    Products - duplex filter assemblies

    DLF / DLFM high flow low-medium pressure duplexes are ideal for critical high speed bearing lube pumping skids & other high flow or high viscosity applications. Ideal for continuous operation critical systems such as turbine seal oil, boiler feed pumps, FD-ID fan lube oil. Ideal for critical hydraulic systems such as HPU pump discharge, wind turbine and marine hydraulics. DFH high pressure duplex operating pressures up to 3000 psi / 210 bar.


    Products - high pressure filters

    PFH pressure filter max operating 8700 psi / 615 bar available in four sizes to handle applications from actuator valves to high flow pump discharge. PFHB bi-directional filter with 6200 psi / 450 bar operating pressure filter fluids in both flow directions. PF4 high flow high pressure filter max operating pressure 5000 psi / 350 bar. PFH features DFE rated filter elements for lower more stable ISO codes.


    Products - low pressure filters

    TF4 in-tank return filters with operating pressures to 150 psi / 10 bar feature Hy-Pro coreless elements or optional HF4 auto spec element. Low pressure spin-on assemblies with operating pressure to 200 psi / 14 bar feature DFE rated elements in a wide range of media options. MF3 medium pressure in-line filter with operating pressure up to 1200 psi / 83 bar is ideal for hydrostatic charge circuits.