fire retardant paint

By: Sharpshell industrial solutions  03-02-2012
Keywords: fire retardant paint

Fire Retardant and Flame Retardant Paint and Coatings are used to provide additional time in a fire situation to exit a building and extra time for firefighters to do their job before the fire spreads. Fire Resistive coatings provide protection for structural steel so that buildings don't collapse in a fire. Our Flame Retardant Fabric coatings help protect drapes and tarps and other fabrics from fire. These coatings save lives!

Keywords: fire retardant paint

Contact Sharpshell industrial solutions


Print this page


Other products and services from Sharpshell industrial solutions



industrial and commercial painting


Duocoat VD vibration damping

vibration damping


Duocoat TM marine insulation

marine thermal insulation


Duocoat TI

thermal insulation


Red lead Encapsulation Problems

Use a coating that is specifically designed for use over MCU, epoxy, vinyl, alkyd, acrylic, phenolic and red lead. Wasser’s premium, surface-tolerant, intermediate coating, MC-Miomastic 100 utilizes a premium blend of micaceous iron oxide (MIO) and corrosion inhibiting pigments and resins designed for application over most any generic primer/coating system. The plate-like structure of MIO provides maximum surface tolerance by its ability to overlap most conventional coatings without compromising


Dew point restrictions

Call sharpshell for coatings with no due point restrictions


Low VOC high performance coatings

Sharpshell offers the Wasser 100 range of high performance coatings .Enjoy tomorrow’s technology today .By using the 100 range applicators/contractors and organizations will comply with any regulation that deals with VOC emissions.


Paint jobs in restricted areas

Use a high performance coating with less than 150g/l VOC .This means that release of VOCs minimal and applications can be done without hiring ventilation machines but only with masks. Sharpshell has a high performance 100 range i.e. coatings with 100g/l VOC.


Over coating Old galvanized structures

Use a coating that typically extend the lifetime of a galvanized system to get maximum benefit. Sharpshell’s MC-Miozinc overcoats all galvernised structures with easy. Yes. ‘WASSER MCU’ coatings typically extend the lifetime of a galvanized system more than twofold. The galvanized surface should be solvent wiped and likely needs to be abraded. Additionally, ‘WASSER MCU’ zinc primers qualify as a cold-galvanizing product to repair hot-dipped galvanized structures that have been damaged during in


Humidity Problems During and After Application

For African applications humidity ranges between 6% and 99%. Use Wasser High performance coatings because they can be applied without problems in humidity levels of 6-99%.


Anti-Slip floors

O save on project costs use a single component anti-slip coating with glass aggregate in the material to give excellent resistance to slippage. MC-TruGrip uses its unique moisture cure urethane properties to provide a strong surface for harsh environments. MC-TruGrip is designed for single coat applications over recommended primers on a variety of surfaces. This coating will work in environments that are exposed to temperatures of up to 141 Deg C. The above system shows MC-Miozinc/MC-Ferrox


High Heat Coating Failures

Use a coating that is specially formulated for application to Hot Surfaces. Industrial Hi-Heat Coatings are based on 100% silicone resin. They can be applied to metal exhibiting temperatures in the range of (121°C -260°C). This unique feature allows for the coating of hot equipment without complete shutdown, resulting in a fast turnaround time to resume normal operating temperatures. It should be noted that when applied at ambient temperatures the coating will remain in a tacky state until a m


Problems with New coatings peeling off old coatings

Epoxies are brittle, and upon curing in certain conditions like very cold environments or with heavy films, tend to pop off the old coatings within one to three years. WASSER MCU Coatings have dramatically better flexibility to conform to different adhesion and cohesion coefficients. The coatings are specifically formulated with precise additives and with the synergistic use of micaceous iron oxide in every coat. Our track record on over 3000 bridges, with all manner of application, in climates


Lead based paint Overcoat restrictions

In simplest terms, an over coating system need properties to perform well, which include flexibility, breathability, better adhesion characteristics, and synergy with the system being overcoated without causing embrittlement or delamination. Wasser advanced technology has all this .Additionally, the application advantages make coating under field conditions easier and quicker, which is opposite of traditional plural-component technology. WASSER developed and formulated systems specifically for o


Coal Tar Epoxy problems

MC-Tar(now at 100g/l VOC) Improved UV resistance. Remains flexible over time Abrasion resistant (ASTM 4060-90 ≤ 3,1mg loss). No recoat window. No irritation to applicator’s skin or eyes. Max. film build of 250µm in one coat. Passes LC 50 Fish Toxicity test Contains MIO (Micaceous Iron Oxide). Single component Moisture Cure Urethane No mixing errors – no pot life Easy to apply by brush, roller or spray methods Maintains build on edges, threads, and weld seams Immersion and non-immers