Weather Station | South Africa - Product Range Weather Stations - loggers

By: Inteltronics Instrumentation  11-11-2011

The AM16/32 Multiplexer increases the number of sensors that can be measured by a CR10(X), 21X, CR23X, CR5000, or CR7 datalogger. The AM16/32 sequentially multiplexes 16 groups of four lines (a total of 64 lines) through four common (COM) terminals. Amanual switch setting allows it to multiplex 32 groups of two lines (also a total of 64 lines) through two COM terminals. Compatible sensors include thermistors, potentiometers, load cells, strain gages, vibrating wires, water content reflectometers, and gypsum soil moisture blocks.The AM16/32 not only increases system channel capacity, it also reduces the cost of cabling individual sensors on long wire runs. The maximum distance between the datalogger and the AM16/32 is determined by the sensors used, the datalogger’s scan rate, and the cable used in the application. The AM16/32 combines the attributes of our AM416 and AM32 multiplexers. It can be manually configured to multiplex channels in 16 groups (four lines at a time) or 32 groups (two lines at a time). 


Contact Inteltronics Instrumentation

Email

Print this page

Share

Other products and services from Inteltronics Instrumentation

11-11-2011

Weather Station | South Africa - Product Range Weather Stations - windsensors

Voltage outputs, 0 to 4000 mV (select from U, V, W, Sonic temperature or Speed, Azimuth, Elevation, Sonic temperature.


11-11-2011

Weather Station | South Africa - Product Range Weather Stations - pressure

The Model 61205V Barometric Pressure Sensor is a versatile electronic barometer featuring high accuracy, low power, wide operating temperature range and calibrated voltage outputs. The accuracy, which is better than ±0.5 hPa , is maintained over the entire pressure and temperature ranges. Mounting holes on the case allow for panel mounting with holes 1 inch on centre.


11-11-2011

Weather Station | South Africa - Product Range Weather Stations - software

LoggerNet 3.1, our full-featured datalogger support software, facilitates programming, communications, and data retrieval between Campbell Scientific dataloggers and a PC. This 32-bit software supports all contemporary dataloggers, all datalogger operating systems (e.g., mixed-array, table data, PAKBUS®), and many retired dataloggers.