exentricities texturised wall coating specialists

By: Excentricities  11-11-2011
Keywords: Stone, Acrylic Resin, Plasticisers

STRIATO /DORIC TROWEL APPLICATION

The most important characteristics of these two wall finishes is the structure provided by the quartz aggregates which gives them hardness and resistance to wear but also pemits the walls to breathe.

Acrylic resin binders are used with inorganic colourfast pigments and various fungicides, water repellent agents, plasticisers and other additives. These make STRIATO and DORIC resistant to weathering, extreme temperature variations and ultra violet degradation.

STRIATO PLASTER TROWEL APPLICATION

They are perfectly washable and will keep their plasticity for many years so hiding any plaster cracks which may develop underneath. Each product is supplied in two grades - FINE and MEDIUM.

The most important characteristics of this wall finish is the structure provided by the silica which gives it hardness and resistance to wear but also pemits the walls to breathe.

Acrylic resin binders are used with inorganic colourfast pigments and various fungicides, water repellent agents, plasticisers and other additives. This makes STRIATO PLASTER resistant to weathering, extreme temperature variations and ultra violet degradation.

It is perfectly washable and will keep its plasticity for many years so hiding any hairline plaster cracks which may develop underneath.

RUSTIC TROWEL APPLICATION

Acrylic resin binders are used with inorganic colourfast pigments and various fungicides, water repellent agents, plasticisers and other additives. This makes RUSTIC resistant to weathering, extreme temperature variations and ultra violet degradation.

Rustic is a modern coating made of selected quartz, marble and other aggregates, acrylic polymer resins, inorganic colourfast pigment and various fungicides, water repellent agents, plastcisers and other additives

It is perfectly washable and will keep its plasticity for many years so hiding any plaster cracks which may develop underneath. The product is available in a FINE or MEDIUM rexture.

GRANITICO plasticised coating is for exterior and interior use on walls and ceilings. It is made up of graded colour stone marble chips, bound by pure ACRYLIC RESINS, PLASTICISERS and various other additives. The ACRYLIC RESIN used in this product is binding and protective, thus perfectly resisting the most unfavourable atmospheric conditions.

The coating is not altered by corrosive action of marine climates, industrial fumes or ultra-violet radiation. Amongst the various additives forming part of this product are fungicidal agents preventing the formation of mould or fungi.

The coating allows the wall to breathe and prevents water from penetrating through the substrate. It is easily washable with the most common detergents and in the event of severe soiling, it can be cleaned with diluted acids.

GIORGIONE STONE FINISH

GIORGIONE is a exposed aggregate finish made up of a pigmented pure acrylic backing paste and stone chips which are imbedded into the paste. The stone chips are two different sizes of 2.3mm and 4.8mm.

The backgroung paste is closely matched in colour to the stone chips.The coating can be applied in panels with masked joints between the panels. The joints can be painted in a contrasting colour or a colour to match the stones, if required for a different effect.

GIZELLE SPRAY

GIZELLE SPRAY coating is made from coloured stone or marble chips, bound by pure acrylic resins, plasticisers and other additives. The ACRYLIC RESINS used in this coating are binding and protective thus perfectly resisting the most unfavourable atmospheric conditions.

The coating is not altered by corrosive action of marine climates, industrial fumes or ultra-violet radiation. Amongst the various additives forming part of this product are fungicidal agents preventing the formation of mould and water repellant agents, preventing water from penetrating through the substrate. It is easily washable with the most common detergents and in the event that it should become soiled with alkali substances, it can be cleaned with diluted acids.

HAGAR SPRAY

HAGAR SPRAY COATING is made up of spheroidal marble granules, water and emulsified acrylic resins. A mixture of different additives, amongst which are fungicides, inorganic colour-fast pigments, water repellent agents and plasticisers make HAGAR SPRAY resistant to weathering extreme temperature variations and ultra-violet degradation. It is perfectly washable and will retain its plasticity for many years, thus hiding plaster cracks, which may appear after time.

NERVI SPRAY

NERVI SPRAI coating consists of considerably light micro aerated aggregates and pigmented quartz silica. The binder, made up of water emulsified acrylic resin and a mixture of different additives, gives NERVI SPRAY notable aesthetic effects. Its peculiar macro cellular structure allows the necessary transpiration of the base.

TOPCOAT / SEALER

TOPCOAT / SEALER is composed of a mixture of silicon derivates in solvents, which because of their highly penetrative characteristics and long life ensure excellent resistance to atmospheric stresses.

TOPCOAT / SEALER when applied to absorbent surfaces seals uniformly and remains permanently active. It is water rpellent but at the same time permits the walls to breathe. It protects the surface from eventual damp stains and constantly reacts against the formation of mould, moss etc.. It is self-cleaning and does not change the chacteristics of the support. TOPCOAT / SEALER us perfectly transparent.

TOPCOAT / SEALER further protects the surface from dirt ingress, especially in very populated areas, and in general all facades taht are exposed to bad weather conditions.

Keywords: Acrylic Resin, Plasticisers, Stone, Water Repellent Agents