CONCRETEWISE Africa

By: Concretewise  11-11-2011
Keywords: sealer

 POLYMER MODIFIED CEMENTS

STAMP-CRETE™ Pre-Mixed Polymer Modified Cement: (Just add water): 25Kg

A high strength, cementitious coating material designed for resurfacing, overlaying and texturing stable concrete surfaces. STAMP-CRETE™ is a “just add water” Pre-mix for creating Thin Stamped Coatings, Patching or Regrading. Sold as White, but can be custom coloured with COLOURWISE™ Colourants to achieve over 30 base colours and can be stained with CHEM-STAIN™ Antiquing Acid Stain or ULTRA-STAIN™ Antiquing Stain for additional highlighting effects.

Advantages:

► “Just add water” Pre-mix means no guessing.

► Precisely engineered mix design – contains the exact cement and aggregate size, shape and composition to ensure high performance, ease of use and product consistency.

BOND-CRETE™ Pre-Mixed Polymer Modified Cement: (Just add water): 25Kg

A high strength, cementitious coating material designed for resurfacing, overlaying, and texturing stable concrete surfaces. BOND-CRETE™ is a “just add water” Pre-mix for creating Skim Coats, Broom Finishes, Splatter Textures and Knockdown Finishes. Sold as White, but can be custom coloured with COLOURWISE ™ Colourants to achieve over 30 base colours and can be stained with CHEM-STAIN™ Reactive Acid Stain or ULTRA-STAIN ™ Antiquing Stain for additional highlighting effects.

Advantages:

► “Just add water” Pre-mix means no guessing.

► Precisely engineered mix design – contains the exact cement and aggregate size, shape and composition to ensure high performance, ease of use and product consistency.

  MICRO-CRETE™ Pre-Mixed Polymer Modified Cement: (Just add water): 13Kg

A high strength, cementitious coating material designed for creating an extremely smooth finish to the top of BOND-CRETE™ Pre-Mixed material. MICRO-CRETE™ Pre-Mixed coating material is a “just add water material used for creating smooth finishes. Sold as White and can be custom coloured with COLOURWISE ™ Colourants to achieve over 30 base colours and can be stained with CHEM-STAIN™ Reactive Acid Stain or ULTRA-STAIN ™ Antiquing Stain for additional highlighting effects.

Advantages:

► “Just add water” Pre-mix means no guessing.

► Create a smooth finish like that of a hard towelled surface with very little effort or time.

► Cost is just fraction of self-levelling materials.

► Precisely engineered mix design – contains the exact cement and aggregate size, shape and composition to ensure high performance, ease of use and product consistency.

► Ideal for creating a uniform surface colour when discoloration is present prior to staining.

CASTING-CRETE™ Pre-Mixed Polymer Modified Cement: (Just add water): 20Kg

A high strength, cementitious casting material designed for casting Concrete-Countertops. CASTING-CRETE™ Pre-Mixed casting material is a “just add water" product. Sold as White and can be custom coloured with COLOURWISE ™ Colourants to achieve over 30 base colours. A range of decorative stones and chips are available to add strength and create a colourful designer finish. (View Decorative Stones and Chips under "PRODUCT EXTRAS"

Advantages:

► “Just add water” Pre-mix means no guessing.

► Create a designer Concrete-Countertop that can be de-moulded in 8hrs.

► Cost is just fraction of some other products used to make Countertops.

► Precisely engineered mix design – contains the exact cement and aggregate size, shape and composition to ensure high performance, ease of use and product consistency.

► Ideal for creating a high strength Concrete Countertop to meet the Clients requirements.

TOMB-CRETE™ Pre-Mixed Polymer Modified Cement: (Just add water): 20Kg

A high strength, cementitious casting material designed for casting Concrete Tombstones. TOMB-CRETE™ Pre-Mixed casting material is a “just add water" product. Sold as White and can be custom coloured with COLOURWISE ™ Colourants to achieve over 30 base colours. A range of decorative stones and chips are available to add strength and create a colourful designer finish. (View Decorative Stones and Chips under "PRODUCT EXTRAS"

Advantages:

► “Just add water” Pre-mix means no guessing.

► Create a designer Concrete Tombstones that can be de-moulded in 8hrs.

► Cost is just fraction of some other products used to make Tombstones.

► Precisely engineered mix design – contains the exact cement and aggregate size, shape and composition to ensure high performance, ease of use and product consistency.

► Ideal for creating a high strength Concrete Tombstones to meet the Clients requirements.

PATCH-CRETE™ Pre-Mixed Polymer Modified Cement Kit: 20Kg

A high strength, cementitious material designed for patching and leveling concrete surfaces.

Advantages:

► Just add modifier. Pre-mix means no guessing, to ensure high performance, ease of use and product consistency.

► Ideal for high strength leveling and patching of existing surfaces before applying concrete overlays, vinyl, tiling, laminate flooring and many more.

PRIMERS

ULTRA-PRIME Priming Agent: 4Lt and 20Lt

ULTRA-PRIME ™ Priming Agent is a ready to use, polymer modified, penetrating primer that is designed to not only promote adhesion between the substrate and the CONCRETEWISE ™ Pre-mixes , but also reduces the transfer (bleed through) of unwanted stains, tile marks and undesirable variegations

  SEALERS

CCS Concentrated Concrete Solvent Sealer : 20Lt

A 53% solids, concentrated, clear, methyl-methacrylate based sealer that must be diluted prior to use. Example: 3 parts SEAL-SOLV ™ or approved solvent to 1 part CCS Sealer for cure & seal applications, 2:1 for sealing thin stamped coatings & concrete applications and 1:1 for sealing splatter textures and other floor applications.

Advantages:

► Due to the concentration, CCS Concentrated Concrete Solvent Sealer is the most versatile sealer available in all of the industry.

► Extremely low VOC.

AUS Aliphatic Uretane Sealer : 5Lt

A high gloss twin pack aliphatic polyurethane sealer with good durability and colour stability. Cured Coat is non toxic. Thickness 300 to 100 microns, 2 coat system.

Advantages:

► Used as a surface coating where a sealed, hard wearing and mild chemical resistant finish is required, such as hospitals and food processing areas.

PU1 Single Pack Clear Polyurethane Sealer : 5Lt & 20Lt

A moisture cured polyurethane Sealer. Exceptional toughness and good flexibility. A tough flexible water resistant sealer for surfaces exposed to damp and moisture and where all-round properties is a requirement.

Advantages:

► A good seal coat for indoor concrete floors and as a damp-proofing system.

PU2 Twin Pack Clear Polyurethane UVC Sealer : 5Lt Kit

Exceptional toughness and good flexibility. A tough flexible water resistant sealer for surfaces exposed to damp and moisture and where all-round properties is a requirement.

Advantages:

► A good seal coat for out-door concrete floors and as a damp-proofing system.

EP2 High Solids Epoxy : 5Lt

A twin-pack, high solids epoxy coating cured with a cycloaliphatic cross linking agent. Thickness 100 to 300 microns, 2 coat system.

Advantages:

► A good seal coat for concrete floors and as a damp-proofing system.

  WBCS Waterborne Concrete Sealer: 4Lt and 20Lt

A clear, single component, waterborne concrete sealer used in sealing and protecting any concrete coating. It exhibits good colour retention and provides a flexible, tough film with resistance to staining, wear and abrasion. For use on BOND-CRETE ™ , STAMP-CRETE ™ and MICRO-CRETE ™.

STAINS

ULTRA-STAIN™ Antiquing Stain – Neutral Base : 4Lt

A safe easy to use, penetrating concentrated stain designed for colouring and highlighting textured cementitious surfaces. The colouring effect is not that of an opaque paint, but rather an “antiquing, natural and translucent” variable colouring. User must dilute and colour the stain before use. Can be effectively custom pigmented with COLOURWISE ™ Colourant for a wide array of colours.

Advantages:

► Concentrated to decrease cost. Sold as a neutral base with easy to read colouring instructions to obtain 30 different colours. Must be diluted prior to use.

  CHEM-STAIN™ Reactive Acid Stain : 4Lt

A permanent stain that reacts chemically with concrete and polymer modified cement pre-mix materials to add antique colouring effects. User must dilute the stain before use.

Advantages:

► Creates natural looking colour variations that are unique.

► Will not peel, chip or flake off.

RELEASE AGENTS

EASI-PRINT™ Liquid Release Agent: 4Lt and 20Lt

An alternative to powdered release agents eliminating the mess and difficulty of use. Designed for ease of release of concrete and cement coatings from stamps and forms. 100% evaporating formula which leaves a very crisp impression. Sweet scent.

Advantages:

► Virtually no mess when compared to power release agents.

► Decrease down time – The surface can be coloured simply once evaporated, which is normally less than 4 to 6 hours.

  COLOURANTS

COLOURWISE Pigment Colourant : 1Lt

A ready to use, liquid colourant designed for pigmenting STAMP-CRETE™, BOND-CRETE™, and MICRO-CRETE™ Pre-Mixed coating materials, as well as ULTRA-STAIN™ Antiquing Stain – Neutral Base. COLOURWISE ™ Colourant consists of 10 primary colours, Deep Coffee, Burnt Orange, Jade Green, Ocean Slate, Sunset Sand, Raven, Pewter, Dark Khaki, Brick Red, Avocado.

Advantages:

► No need for mixing and matching various colours.

► Consistent & Error Proof

Versatile – Only 10 different base colours, easily create over 30 different shaded colours.

SCPP: Synthetic Concrete Primary Pigment : 1Lt

An extremely concentrated synthetic concrete pigment for colouring polymer modified materials and neutral base stains.

Available in Black, White, Red, Blue, Green & Yellow.

Synthetic Oxide Powder Pigment : 1Kg

A synthetic oxide powder for colouring polymer modified or regular cement / concrete mixes.

Available in Black, Red, Blue, Green ,Yellow & Brown.

  PRODUCT EXTRAS

Concrete Etch Acid – Concentrated and used to acid wash surfaces: 4Lt

Industrial Ammonia – Industrial concentration used to neutralize Concrete Etch Acid, CHEM-STAIN ™ & Hydrochloric Acid: 4Lt

Seal-Solv 90 – A 90% Pure Solvent used to dilute CCS: 20Lt

Stamp Rehabilitator – A must for cleaning & maintaining your Texture Skins & Stamping Mats:1Lt

Resifil 101 – A 2 Part Epoxy Resin Kit, used to fill cracks and prepping tiles for a concrete coating: 1Lt and 5Lt

Graded Silica Sand - For tile prep, crack filling, and can be used as a non slip additive: 25Kg

Perma-Grip – A slip resistant additive that can be added to CCS Concrete Sealer: 1Kg

Decorative Stone and Chips – A range of decorative stones and chips, specially supplied to create designer Concrete Countertops and Tombstones. Various colours: Ivory, Green/Grey, Granite, Marble, Browns, Red Jasper etc. Sold in 20kg bags.

ACCESSORIES

Grouting Syringes – Used for applying grout in saw-cut lines and measuring pigment. Available in 60ml, 20ml, 10ml, 5ml: Ea

Design Tape Clear - ¼” – A +/- 6mm reinforced tape used to design patterns and create grout lines: 40m Roll

Design Tape Clear - ½” – A +/- 12mm reinforced tape used to design patterns and create grout lines: 40m Roll

Foam Brush – 25mm – For what a paint brush cannot do. Used for detailed design and colour application : Ea

Foam Brush – 45mm – For what a paint brush cannot do. Used for detailed design and colour application : Ea

Foam Brush – 70mm – For what a paint brush cannot do. Used for detailed design and colour application : Ea

Foam Brush – 95mm – For what a paint brush cannot do. Used for detailed design and colour application : Ea

Spike Shoes – Durable plastic, used to walk on Splatter applications and wet work: Pair

Spiked Rollers – Spikes 12mm & 31mm, roller width 100mm, 225mm, 300mm, 450mm, 600mm, 900mm, including or excluding frame and axle: Ea

Various Concrete Seamless / Imprint Texture Skins – Specially designed for thin stamped coatings to ensure excellent impressions at a minimal application in thickness: Ea

Various Concrete Seamless / Imprint Touch-Up Skins – Specially designed for thin stamped coatings to ensure excellent impressions at a minimal application in thickness: Ea

Various Concrete Stamping / Imprint Mats – Specially designed for thin stamped coatings to ensure excellent impressions at a minimal application in thickness. Ea

SPECIALITY TOOLS

Gauge Rake - Adjustable 800mm. Used for applying Stamp-Crete at a determined gauged thickness: Ea

Magic Trowel 325mm - Rubber Blade Trowel for detailing and creating smooth finishes: Ea

Magic Trowel 450mm - Rubber Blade Trowel for detailing and creating smooth finishes: Ea

Hopper Gun – Used in conjunction with a compressor and used for non-slip splatter textures: Ea

Heavy Duty Mixer  – For the ease of mixing cementitious products: Ea

High Pressure Washer – Minimum 160bar with turbo/hurricane nozzle. Sometimes gets used for surface preparation. Can be hired:

Diamond Floor Grinders – Walk-Behind, Large Hand-Held, Small Hand Held . Gets used for surface preparation. Can be hired

Compressor – Minimum of 7.5cfm. Gets used when applying splatter textures. Can be hired: Ea

Dust Extractor – Can be attached to most new electric cutting, grinding and sanding tools: Ea

MARKETING

Photo 8 Page Brochure – Ideal marketing and selling brochure : Ea

Photo Postcard – Great for hand-outs: 20's


Business Card CD – Custom made presentation CD: 5's

Yard Sign - Double Sided and perfect to place on the verge at your job-site for advertising and attracting attention: 2's

Window/Vehicle Decal – Used to brand your truck and trailer etc: 2's

BRANDED CLOTHING

Caps – Embroidered and a must to create corporate identity: Ea

T/Shirts – XXL, XL, L, M, S – Printed and a must to create corporate identity: Ea

SPECIAL ORDERS

Due to our buying power, Concretewise Africa will negotiate with suppliers on prices and source various products required by our Contractors that are not available to the Contractors in their immediate area, both locally and internationally.

Keywords: sealer